Infrared Heater Tansun Apollo 1 - 2kW

Apollo Infrared Heater 

The robust TANSUN Apollo models are suitable for both wall mounting and vertical ceiling mounting. The large reflector ensures an optimal effect of the heating output. Critical components of the spotlight are optimally cooled by the design. This property is extremely important, especially indoors, because there is usually less air circulation than outdoors. The devices are extremely durable and also perfected for continuous operation (e.g.> 8 hours a day). 

With this series you can heat up individual work areas from 10 square meters, but also implement full-surface (zone) heating solutions in the hall.   

Main characteristics: 

Efficient warmth: short -wave Infrared Heater Primarily heat surfaces and not the air. Similar to sunbathing during winter sports, you get warm, even though the air temperature remains cold-but without a UV content. This property is very advantageous if storage gates have to be opened regularly or the hall is not extensively insulated.

Fast warming: short -wave Infrared Heater enable immediate warming of surfaces and people without having to heat up the room air beforehand.

Zone -specific control: Our technology enables flexible and needs -based heating of various open hall areas to optimize energy consumption.

Uncomplicated installation: The simple installation without complex construction work minimizes the space requirement and preserves the flexibility of the interior design. The electrical infrared heaters can not only be assembled well in the event of a new building, but also with existing objects. The laying of underfloor heating or concrete core activation is usually not a sensible option here. This technology also does not need a gas connection or exhaust gas line.

Environmentally friendly: electrical Infrared Heater Do not produce harmful emissions, and with a corresponding power supply, even CO2-neutral operation is possible. In that case, this solution helps GEG-On -compliant (building energy network) and their ESG-to achieve goals.

Made in Europe: Short transport routes and fair working conditions are guaranteed here. 

Technical data 

Performance: 2000 watts

Color: Ral9005 deep black

Weight: 3kg 

Power closure: 230V, firmly wired, secured with Type C cable system switch 

Recommended attachment height: 2.5 m with an inclination of approx. 45 ° or 3.0-3.5 m at a vertical assembly 

Dimensions (LXHXT): 490 mm x 255 mm x 110 mm 

Scope of delivery: wall bracket (horizontally and vertically swiveling), 2m connection cable without plug

Heated area: approx. 10 sqm, depending on the assembly height and ambient temperature  

Areas of application 

Hommiertisch, packing table, desk in the hall, jobs at the warehouse, workshop, sports hall, hall heating, workplace for mechanical and plant drivers, church, etc. 

Assembly and operation 

Assembly: The wall angle is attached to the wall with 2 screws (not included in the scope of delivery). Alternatively, the angle can be installed on the ceiling or the radiant heater is suspended with chains (chains are not included in the scope of delivery).

Operation: Easy on and off with a wired switch (not included in the scope of delivery). We recommend the operation in combination with the 2kW dimmer. 

Maintenance: Always separate the power supply first when cleaning and repairs. The reflector must be kept clean. Before switching on, the heating tube should be free of foreign bodies (leaves, rough dirt, etc.), otherwise the lifespan of the tube is shortened. Cleaning alcohol is suitable for cleaning the tube. In the event of a defect, the tube can be exchanged in a few minutes (see operating instructions).  

With the "Apollo" Infrared Heater Experience immediate, efficient and environmentally friendly warmth at the push of a button. Perfect for difficult heating halls, where heat is needed over longer periods. 

operation manual