Immediate start-clear bundle: TANSUN Infrared Heater Apollo 2x3 kW (Ü) with dimmer

This appealing bundle includes the TANSUN Infrared Heater "Apollo" in a powerful 3 kW version as well as a practical dimmer and button. With this dimmer you have the option of adapting the heating output conveniently to the push of a button in four different stages. So you can do the performance of the TANSUN Adjust infrarothic rays "Apollo" according to your wishes. If you reduce the power of the heater with the dimmer, you also lower your electricity consumption.

With this device combination, you can easily heat an area of ​​around 30 - 40 sqm, depending on assembly height and ambient temperature. You also have the option of optional Radio remote control To use the dimmer additionally.

The following scope of delivery is included in this "immediate start-up bundle":

· 2 x TANSUN Infrared Heater Apollo 3 kW; Color RAL 9005 deep black

· Radio/button room, continuously dimmable (6kw over 1 phase)

· Buttons for control at the push of a button

You only need cables for the connection (between dimmer and button or power supply). Since these lengths vary greatly, these are not part of the bundle.

Apollo Infrared Heater 

The robust TANSUN Apollo models are suitable for both wall mounting and vertical ceiling mounting. The large reflector ensures an optimal effect of the heating output. Critical components of the spotlight are optimally cooled by the design. This property is extremely important, especially indoors, because there is usually less air circulation than outdoors. The devices are extremely durable and also perfected for continuous operation (e.g.> 8 hours a day). 

Main characteristics: 

Efficient warmth: short -wave Infrared Heater Primarily heat surfaces and not the air. Similar to sunbathing during winter sports, you get warm, even though the air temperature remains cold-but without a UV content. This property is very advantageous if storage gates have to be opened regularly or the hall is not extensively insulated.

Fast warming: short -wave Infrared Heater enable immediate warming of surfaces and people without having to heat up the room air beforehand.

Zone -specific control: Our technology enables flexible and needs -based heating of various open hall areas to optimize energy consumption.

Uncomplicated installation: The simple installation without complex construction work minimizes the space requirement and preserves the flexibility of the interior design. The electrical infrared heaters can not only be assembled well in the event of a new building, but also with existing objects. The laying of underfloor heating or concrete core activation is usually not a sensible option here. This technology also does not need a gas connection or exhaust gas line.

Environmentally friendly: electrical Infrared Heater Do not produce harmful emissions, and with a corresponding power supply, even CO2-neutral operation is possible. In that case, this solution helps GEG-On -compliant (building energy network) and their ESG-to achieve goals.

Made in Europe: Short transport routes and fair working conditions are guaranteed here. 

Technical data 

Performance: 2 x 3000 watts

Color: Ral9005 deep black

Weight: 2 x 4kg 

Power closure: 230V, firmly wired, secured with Type C cable system switch 

Recommended attachment height: 2.5-3.5 m with an inclination of approx. 45 ° or 3.0-4.0 m with a vertical assembly 

Dimensions (LXHXT): 2 pieces each 422 mm x 390 mm x 110 mm 

Scope of delivery: wall bracket (tendency to top and bottom and horizontally swiveling), dimmer, button. Connection cables are not included because the required length varies on site. 

Heated surface: 2 x approx. 15-20 sqm, depending on assembly height and ambient temperature  

Areas of application 

Hommiertisch, packing table, desk in the hall, jobs at the warehouse, workshop, sports hall, hall heating, workplace for mechanical and plant drivers, church, etc. 

Assembly and operation 

Assembly: The wall angles are attached to the wall with 2 screws (not included in the scope of delivery). Alternatively, the angles can be installed on the ceiling or the radiant heater is suspended with chains (chains are not included in the scope of delivery). There is an easily accessible cabling box on the underside of the device. The heating spotlight cable is connected to the dimmer. The dimmer must be wired with the button and with a 230V power supply on site.

Maintenance: Always separate the power supply first when cleaning and repairs. The reflector must be kept clean. Before switching on, the heating tube should be free of foreign bodies (leaves, rough dirt, etc.). Cleaning alcohol is suitable for cleaning the tube. In the event of a defect, the tube can be exchanged in a few minutes (see operating instructions).  

Do you still have any questions? We are happy to help.

Operating instructions