Ready-to-start bundle: 6 kW(n) infrared heater with dimmer

This attractive bundle includes the TANSUN Apollo infrared heater in a powerful 6 kW version, as well as a practical dimmer and push button. With this dimmer, you can conveniently adjust the heating output continuously at the touch of a button. This allows you to set the output of the TANSUN Apollo infrared heater according to your preferences. If you reduce the heater’s output using the dimmer, you also reduce your electricity consumption at the same time.

With this combination of devices, you can effortlessly heat an area of approximately 30–40 m², depending on the mounting height and ambient temperature. You also have the option of using an optional wireless remote control to control the dimmer as well.

The following items are included in this “Ready-to-Start Bundle”:

· 1 x TANSUN Apollo infrared heater, 6 kW; RAL 9005 deep black

· Wireless/push-button dimmer, continuously variable (6 kW via 1 phase)

· Push button for control at the touch of a button

You only need to provide the connection cables (between the heater and dimmer, and between the dimmer and push button or power supply). As the required lengths vary considerably, these are not included in the bundle. The heater has a connection for 3 phases. To operate it with the 230 V dimmer, the connection is bridged accordingly from 3 phases to 1 phase.

Apollo infrared heater 

The robust TANSUN Apollo models are suitable for both wall mounting and vertical ceiling mounting. The large reflector ensures optimum heating performance. The heater’s critical components are optimally cooled by its design. This feature is especially important indoors, as there is generally less air circulation than outdoors. The units are extremely durable and have also been perfected for continuous operation (e.g. >8 hours per day). 

Key features: 

Efficient heat: Short-wave infrared heaters primarily warm surfaces rather than the air. Similar to sunbathing during winter sports, you feel warm even though the air temperature remains cold—but entirely without UV radiation. This feature is particularly advantageous when warehouse doors must be opened regularly or the building is not extensively insulated.

Rapid heating: Short-wave infrared heaters instantly warm surfaces and people without having to heat the room air first.

Zone-specific control: Our technology enables flexible, demand-based heating of different open areas within a building, helping to optimise energy consumption.

Straightforward installation: Simple installation without extensive construction work minimises space requirements and preserves flexibility in room design. Electric infrared heating systems can be installed not only in new buildings but also in existing properties. In these cases, installing underfloor heating or activating the concrete core is generally not a practical option. This technology also requires neither a gas connection nor a flue.

Environmentally friendly: Electric infrared heaters produce no harmful emissions, and with an appropriate electricity supply, carbon-neutral operation is even possible. In this case, this solution helps you heat in compliance with the GEG (Building Energy Act) and achieve your ESG goals.

Made in Europe: Short transport distances and fair working conditions are guaranteed. 

Technical data 

Output: 6000 watts

Colour: RAL9005 deep black

Weight: 5.5 kg 

Power connection: 230 V, permanently wired, protected by a Type C circuit breaker 

Recommended mounting height: 2.5–3.5 m at an angle of approximately 45°, or 3.0–4.0 m for vertical mounting 

Dimensions (LxHxD): 1282 mm x 255 mm x 110 mm 

Scope of delivery: Wall bracket (pivotable up and down), dimmer, push button. Connection cables are not included, as the required length varies on site. 

Heated area: approx. 30–40 m², depending on the mounting height and ambient temperature  

Applications 

Order-picking table, packing table, desk in a warehouse, workstations at warehouse doors, workshop, sports hall, hall heating, workstation for machine and system operators, marquee, church, etc. 

Installation and operation 

Installation: Each wall bracket is secured to the wall with 2 screws (not included). Alternatively, the brackets can be mounted on the ceiling, or the heater can be suspended using chains (chains not included). An easily accessible wiring box is located on the back of the unit. The heater cable is connected to the dimmer. The dimmer must be wired to the push button and to a 230 V power supply on site.

Maintenance: Always disconnect the power supply before cleaning or carrying out repairs. To ensure optimum heating performance, the reflector must be kept clean. Before switching on the unit, ensure that the heating tube is free of foreign objects (leaves, coarse dirt, etc.). Cleaning alcohol is suitable for cleaning the tube. In the event of a defect, the tube can be replaced within a few minutes (see the operating instructions).  

Do you have any questions? We’ll be happy to help.

Operating instructions