ECOFILM Underfloor Heating Set for Laminate, Wooden Floors, or Floorboards

The ECOFILM set is a modern, efficient solution for the electric heating of rooms with floating laminate or wooden floors. The heating films are available in output levels of 60 W/m² (for wooden floors) and 80 W/m² (for laminate). Installation is dry and can be carried out by the user. Only the electrical connection must be made by a qualified electrician.

The heating film is laid directly under the floor covering and provides even, pleasant warmth. Thanks to its flat design, the system is ideal for renovation projects and new builds without any significant loss of floor build-up height.

Advantages of the ECOFILM set

• Easy self-installation without special tools or a specialist contractor
• Dry installation: no drying time, floor can be laid immediately
• Low build-up height thanks to thin, flexible heating film
• Energy-efficient operation with even surface heating
• Lower temperature fluctuations than with water-based systems
• Gentle on wooden and laminate floors thanks to temperature limitation
• Suitable for many room sizes thanks to heating film that can be cut to size
• Proven system with more than 2.5 million square metres installed across Europe
• Recommended by leading flooring manufacturers such as PERGO, KÄHRS, SCANDIFLOOR, ALLOC and JUNCKERS

Scope of delivery of the ECOFILM set

• Ecofilm F608/55 heating film (or F606/55, 1008) in a custom length
• Two connection cables (SK AV 1.5 mm², 3 metres long), pre-assembled (cold end)
• One pair of insulating discs for end insulation when the film is shortened
• Installation instructions for simple and safe installation

For operation, you will also need a thermostat incl. temperature sensor.

The heating film is available in widths of 600 mm (with 570 mm heating surface) and 1000 mm (with 970 mm heating surface). It can be cut precisely to size every 10 mm and laid side by side without overlapping. The connection cables allow the individual film strips to be connected electrically in parallel.

The maximum surface temperature is limited to 27 °C by a room thermostat with floor sensor. This protects the floor covering and ensures a pleasant indoor climate. Thanks to precise control and direct heat transfer to the floor, the system is particularly efficient and economical.

Whether in new builds or renovations: the ECOFILM set offers a well-thought-out, easy-to-implement way to heat rooms efficiently and comfortably with electricity.