Ready-to-Start Bundle: Infrared Heater 2x2 KW with Dimmer

This attractive bundle includes 2 x TANSUN Apollo infrared heaters in a powerful 2 kW version, as well as a practical dimmer and push button. With this dimmer, you can conveniently adjust the heating output continuously. This allows you to set the output of the TANSUN Apollo infrared heater according to your preferences. If you reduce the heater's output using the dimmer, you also reduce your electricity consumption at the same time.

With this equipment combination, you can effortlessly heat an area of approximately 20–24 m², depending on the mounting height and ambient temperature. You also have the option of using an optional wireless remote control to control the dimmer as well.

The following items are included in this “Ready-to-Start Bundle”:

· 2 x TANSUN Apollo infrared heaters, 2 kW; RAL 9005 deep black

· Wireless/push-button dimmer, continuously dimmable (4 kW via 1 phase)

· Push button for control at the touch of a button

You only need cables for the connection (between the dimmer and push button and for the power supply). As the required lengths vary considerably, these are not included in the bundle.

Apollo Infrared Heater 

The robust TANSUN Apollo models are suitable for both wall mounting and vertical ceiling mounting. The large reflector ensures optimal heating performance. The heater's critical components are optimally cooled by its design. This feature is particularly important indoors, as there is generally less air circulation than outdoors. The units are extremely durable and have also been optimised for continuous operation (e.g. >8 hours per day). 

Key features: 

Efficient heat: Short-wave infrared heaters primarily heat surfaces rather than the air. Similar to sunbathing during winter sports, you feel warm even though the air temperature remains cold—with no UV component. This feature is particularly beneficial when loading bay doors need to be opened regularly or the hall is not extensively insulated.

Rapid heating: Short-wave infrared heaters provide immediate warmth to surfaces and people without first having to heat the air in the room.

Zone-specific control: Our technology enables flexible, demand-based heating of different areas within open halls to optimise energy consumption.

Straightforward installation: Simple installation without extensive construction work minimises space requirements and preserves flexibility in room design. Electric infrared heating systems can be installed not only in new buildings but also in existing properties. In the latter case, installing underfloor heating or activating the concrete core is generally not a practical option. This technology also requires neither a gas connection nor an exhaust system.

Environmentally friendly: Electric infrared heaters produce no harmful emissions, and with an appropriate electricity supply, carbon-neutral operation is even possible. In this case, this solution helps you heat in compliance with the GEG (German Building Energy Act) and achieve your ESG goals.

Made in Europe: Short transport routes and fair working conditions are guaranteed. 

Technical data 

Output: 2 x 2,000 watts

Colour: RAL9005 deep black

Weight: 2 x 3 kg 

Power connection: 230 V, permanently wired, protected by a Type C circuit breaker 

Recommended mounting height: 2.5 m at an angle of approx. 45° or 3.0–3.5 m for vertical mounting 

Dimensions (LxHxD): 2 units, each 422 mm x 255 mm x 110 mm

Scope of delivery: Wall bracket (swivels horizontally and vertically), dimmer, push button. Connection cables are not included, as the required length varies depending on the installation site. 

Heated area: 2 x approx. 10–12 m², depending on the mounting height and ambient temperature  

Areas of application 

Picking table, packing table, desk in a hall, workstations by loading bay doors, workshop, sports hall, hall heating, workstation for machine and plant operators, tent hall, church, etc. 

Installation and operation 

Installation: Each wall bracket is secured to the wall with 2 screws (not included). Alternatively, the brackets can be mounted on the ceiling, or the heater can be suspended using chains (chains not included). An easily accessible wiring box is located on the back of the unit. The heater cable is connected to the dimmer. The dimmer must be wired to the push button and connected to a 230 V power supply on site.

Maintenance: Always disconnect the power supply before cleaning or carrying out repairs. The reflector must be kept clean to ensure optimal heating performance. Before switching on, ensure that the heating tube is free of foreign objects such as leaves and heavy dirt. Cleaning alcohol is suitable for cleaning the tube. In the event of a fault, the tube can be replaced in just a few minutes (see the operating instructions).  

Do you have any questions? We will be happy to help.

Operating instructions