TEL Forza Double 3KW infrared heater with dimmer for industrial, logistics, and workshop use

This attractive bundle includes the TEL infrared heater “Forza” in a powerful 3 kW version together with a practical dimmer and push button. With this dimmer, you can conveniently adjust the heat output at the push of a button. This allows you to set the output of the infrared heater steplessly, just as you wish. When you reduce the output of the heater using the dimmer, you also lower your electricity consumption.

With this combination of units, you can easily heat an area of around 15 to 20 m², depending on mounting height and ambient temperature. You can also use an optional radio remote control to additionally control the dimmer.

This “ready-to-go bundle” includes the following:

· TEL Forza infrared heater 3 kW, colour RAL 9005 Jet Black

· Radio/push-button dimmer, steplessly dimmable

· Push button for control at the push of a button

All you need in addition are cables for the connection (between the heater and the dimmer, and between the dimmer and the push button or power supply). As these lengths vary greatly, they are not part of the bundle.

TEL Forza infrared heaters

The robust TEL Forza models are suitable for both wall mounting and vertical ceiling mounting. The large reflector ensures that the heat output is used to optimum effect. The design provides optimum cooling for the critical components of the heater. This feature is extremely important indoors in particular, as there is usually less air circulation than outdoors. The units are extremely durable and are also perfected for continuous operation (e.g. >8 hours a day).

Key features:

Efficient heat: Short-wave infrared heaters primarily warm surfaces rather than the air. Much like sunbathing during winter sports, you feel warm even though the air temperature stays cold, but entirely without UV radiation. This is a major advantage when warehouse doors have to be opened regularly or the hall is not extensively insulated.

Rapid heating: Short-wave infrared heaters warm surfaces and people instantly, without having to heat the room air first.

Zone-specific control: Our technology enables flexible, demand-based heating of different open hall areas to optimise energy consumption.

Straightforward installation: Simple installation without extensive construction work minimises the space required and preserves flexibility in room layout. Electric infrared heaters are easy to install not only in new builds but also in existing buildings, where laying underfloor heating or concrete core activation is usually not a sensible option. This technology also requires neither a gas connection nor a flue.

Environmentally friendly: Electric infrared heaters produce no harmful emissions, and with a suitable power supply, even CO2-neutral operation is possible. In that case, this solution helps you heat in compliance with the GEG (German Building Energy Act) and achieve your ESG goals.

Made in Europe: Short transport routes and fair working conditions are guaranteed.

Technical data

Output: 3000 watts

Colour: RAL9005 jet black

Weight: 7.25kg

Power connection: 230V, hard-wired, protected by a type C circuit breaker

Recommended mounting height: 2.5-3.5 m at an angle of approx. 45° or 3.0-4.0 m for vertical mounting

Dimensions (LxHxD): 855mm x 250mm x 140mm

Scope of delivery: Wall bracket (tilts up and down), dimmer, push button. Connection cables are not supplied, as the required length varies on site.

Heated area: approx. 15 m², depending on mounting height and ambient temperature

Applications

Picking tables, packing tables, desks in halls, workplaces at warehouse doors, workshops, sports halls, hall heating, workstations for machine and plant operators, tent halls, churches, etc.

Installation and operation

Mounting: The 2 wall brackets are each fixed to the wall. Alternatively, the brackets can be mounted on the ceiling or the heater can be suspended from chains (chains are not included in the scope of delivery). There is an easily accessible wiring box on the back of the unit. The cable from the heater is connected to the dimmer. The dimmer must be wired to the push button and to a 230V power supply on site.

Maintenance: Always disconnect the power supply before cleaning or carrying out repairs. To ensure optimum heating performance, the reflector must be kept clean. Before switching on, the heating tube should be free of foreign objects (leaves, heavy dirt, etc.). Cleaning alcohol is suitable for cleaning the tube. In the event of a defect, the tube can be replaced in just a few minutes (see operating instructions).

Do you have any questions? We are happy to help.