ECOFILM Underfloor Heating Set for Laminate, Wooden Floors, or Floorboards

The ECOFILM Set is a modern and efficient solution for electrically heating rooms with floating laminate or wood floors. The heating films are available in power ratings of 60 W/m² (for wood floors) and 80 W/m² (for laminate). Installation is carried out dry and can be completed by the user – only the electrical connection must be performed by a qualified electrician.

The heating film is installed directly beneath the floor covering and provides even, pleasant warmth. Thanks to its low-profile design, the system is ideal for renovation projects and new builds without significantly increasing the floor height.

Benefits of the ECOFILM Set

• Easy DIY installation without special tools or a specialist contractor
• Dry installation – no drying time, ready for flooring immediately
• Low installation height thanks to the thin, flexible heating film
• Energy-efficient operation with evenly distributed radiant heat
• Smaller temperature fluctuations than with hydronic systems
• Gentle on wood and laminate floors thanks to temperature limitation
• Suitable for many room sizes thanks to the heating film that can be cut to size
• Proven system with more than 2.5 million square metres of installed area in Europe
• Recommended by leading flooring manufacturers such as PERGO, KÄHRS, SCANDIFLOOR, ALLOC and JUNCKERS

Contents of the ECOFILM Set

• Ecofilm F608/55 heating film (or F606/55, 1008) in a customer-specific length
• Two connection cables (SK AV 1.5 mm², 3 metres long) – pre-assembled (cold end)
• One pair of insulating discs for end insulation when the film is shortened
• Installation instructions for easy and safe installation

A thermostat including a temperature sensor is also required for operation.

The heating film is available in widths of 600 mm (with a 570 mm heating area) and 1000 mm (with a 970 mm heating area). It can be cut to size at 10 mm intervals and laid side by side without overlapping. The connection cables enable the individual film strips to be connected electrically in parallel.

The maximum surface temperature is limited to 27 °C by a room thermostat with a floor sensor. This protects the floor covering and ensures a pleasant indoor climate. Thanks to its precise control and direct heat transfer to the floor, the system is particularly efficient and economical.

Whether in a new build or during renovation, the ECOFILM Set offers a well-designed and easy-to-install way to heat rooms efficiently and comfortably with electricity.